iCE40 FPGA Programming with WSL and Open Source Tools
Here are some notes on programming the Lattice Semiconductor iCE40 FPGA chip.This is supplementary information...
Here are some notes on programming the Lattice Semiconductor iCE40 FPGA chip.This is supplementary information...
These are my (admittedly sometimes long and rambling) thoughts and more of a "review" of...
Setting up Cisco Linksys EA3500 as WiFi to WiFi (STA mode) to have wired ethernet...
I spent a ridiculous amount of time trying to persuade native Raspberry Pi OS to...
Connecting ethernet wired-only equipment to WiFi. TL;DR install dnsmasq, edit /etc/dnsmasq.conf to setup DHCP server...
Some notes on setting up a fresh Raspberry Pi. TL;DR Edit 4 files on the...
Over the weekend, I received my EEZ Bench Box 3 that I backed on Crowd...
The Woodpecker boards shares the USB 5VDC line with the power input. I use a...
This is a continuation of my prior blog on limit switch mounting hardware design for...
This is a continuation of my prior blog: The road to CNC3018 Limit Switches.These parts that...
Almost two years to the day! It was way back in 2018 that I bought...
Some time ago I bought a personal CNC machine, as I had always wanted to...
I bought my first-ever reflow oven! I've been wanting to learn to solder SMD devices in...
In my previous post on the iCEBreaker Bitsy FPGA - early adopter version, I mentioned...
A couple of weeks ago, I ordered the early adopter iCEBreaker bitsy FPGA board. It arrived...
The last time I used my Arduino MKR WIFI 1010 was way back when I wrote a...
Today I received a DM on Twitter asking for help to program an FPGA (specifically...
This weekend I went from File-New-Project, Right-Click - Build... to a ULX3S bit file! This was...
After the previous pains of getting Circuit Python to just build for the FOMU, it...
I started down the road of learning FPGA Circuit Python last month, with the (admittedly...
My next post (aka notes to self) on getting a RISC-V compiled app onto the...
First .. the exciting news: With 24 days still left in the Crowd Funding Campaign,...
My ESP32-S2 Saola R1 arrived!! What exactly is that? Well, Iwondered the same thing. Per...
Today is ULX3S Campaign Launch Day on Crowd Supply!!As I write this, funding is at...
Some notes on setting up a soft RISC-V CPU to run Circuit Python.I started with...
In the category of "why didn't I do this sooner" - I finally setup my...
It has been over a year since I first learned about the Radiona ULX3S development...
This is my first post. Neat thing about it - powered by Jekylland I can...
My January efforts have focused on writing C# on an embedded device. Yes, you read...